? preliminary rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demo nstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depende nt on pcb layout and external impedance matching design. see application note no. 42 for details. 4. the design, manufacturing process, and specifications of this filter are subject to change. 5. us and international patents may apply. 6. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 7. ?copyright 1999, rf monolithics inc. 8. electrostatic sensitive device. observe precautions for handling. sm1154-14 229.25 mhz saw filter SF2062A electrical characteristics characteristic sym notes min typ max units nominal center frequency f c 1 229.25 mhz passband insertion loss at fc il 8.35 db 3 db passband bw 3 150 khz fc 100 khz ripple 0.9 db i/o impedance 50 ohm group delay deviation across fc100 khz (-20 to +60c) gdd 150 nsec attenuation fc600 khz 20 db fc900 khz 34 fc1.2 mhz 32 10 mhz to 2 ghz 20 operating temperature range t a 1 -20 +80 c ? quartz temperature stability ? small size ? hermetic 11.5x4.0mm surface-mount case ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c suitable for lead-free soldering - max. soldering profile 260c for 30 s matching to unbalanced 50 w external l-c case style 6 sm1154-14 11.5 x 4.0 mm nominal footprint lid symbolization (yy=year, ww=week s=shift, ##=sequence code ) rfm SF2062A yywws## pb
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 ch1 s11 1 u fs centr 229 . 250 mhz span 4 . 000 mhz cor prm ch2 s21 log 10 db/ ref -40 db center 229 . 250 000 mhz span 4 . 000 000 mhz cor prm ch3 s22 1 u fs centr 229 . 250 mhz span 4 . 000 mhz cor 15 jun 2006 16:26:04 1 1 : 43 . 055 6 . 3574 4 . 4136 nh 229 . 250 000 mhz 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz max ref=1 ch2 markers bw : . 504463 mhz cent : 229 . 239695 mhz q : 454 . 42 1_ loss : -6 . 5451 db 1 1 : 46 . 869 56 . 695 39 . 360 nh 229 . 250 000 mhz SF2062A demo10_1 full full
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 ch1 s11 1 u fs centr 229 . 250 mhz span 4 . 000 mhz cor prm ch2 s21 log 10 db/ ref -40 db center 229 . 250 000 mhz span 4 . 000 000 mhz cor prm ch3 s22 1 u fs centr 229 . 250 mhz span 4 . 000 mhz cor 15 jun 2006 16:28:39 1 1 : 46 . 875 5 . 9023 4 . 0977 nh 229 . 250 000 mhz 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz max ref=1 ch2 markers bw : . 480371 mhz cent : 229 . 243919 mhz q : 477 . 22 1_ loss : -6 . 0778 db 1 1 : 44 . 410 47 . 613 33 . 055 nh 229 . 250 000 mhz SF2062A demo29_1 full full
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 4 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 ch1 s21 log 1 db/ ref -6.575 db ch1 center 229 . 250 000 mhz span 2 . 000 000 mhz c prm ch2 s21 del 100 ns/ ref 1.984 us ch2 center 229 . 250 000 mhz span 2 . 000 000 mhz c smo prm 15 jun 2006 16:18:18 1 2 3 3 : . 38010 db - . 200 000 mhz ref=2 ch1 markers mean : -6 . 3290 db s . dev : . 23570 db p-p : . 95400 db 1 2 3 3 : 9 . 6325 ns - . 200 000 mhz ref=2 ch2 markers mean : 2 . 0406 us s . dev : 44 . 884 ns p-p : 138 . 28 ns SF2062A demo29_2 full full
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 5 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 14-terminal ceramic surface-mount case 11.5 x 4.0 mm nominal footprint recommended pcb footprint case dimensions dimension mm inches min nom max min nom max a 11.4 11.5 11.6 .442 0.450 0.458 b 3.8 4.0 4.2 .150 0.157 .166 c 1.4 1.6 1.8 .057 0.063 .069 d 1.3 1.5 1.7 .053 0.059 .065 e 0.76 0.030 f 1.27 0.050 g 1.27 0.050 h 0.1 0.004 materials solder pad termination au plating 30 - 60 inches (76.2-152 m) over 80- 200 inches (203-508 m) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phosphorus) 100-200 inches thick body al 2 o 3 ceramic pb free electrical connections connection terminals input 2 output 9 ground all others 1 2 3 4 5 6 7 14 13 12 11 10 9 8 b a c d 14 13 12 11 10 9 8 h e f g 1 2 3 4 5 6 7 0.034 typ. (0.86) 0.050 (1.27) typ. 0.067 typ. (1.70) 0.190 (4.84) 0.334 ref. (8.48) sm1154-14 case
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 componentorientationanddimensions carrier tape dimensions ao 4.55 mm 0.1 bo 12.04 mm 0.1 ko 2.13 mm 0.1 pitch 8.00 mm 0.1 w 24.00 mm 0.3 w (carrier tape size) a o b o p (pitch) cover tape size k o cover tape 1.5 mm +0.1 -0.0 4.0 mm 0.1 2.0 mm 0.1 1.75 mm 0.1 1.5 mm +0.3 -0.0 pin #1 user direction of feed
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 7 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 leader and trailer specifications (based upon eia-481) 7 inch reel quantity 500 symbol a n c d b w 1 w 2 dimension 178 +0 -4 60 1 13 +0.5 -0.2 20.2 +1.5 -0 2 0.5 24.4 +2 -0 30.4 max 13 inch reel quantity 2000 symbol a n c d b w 1 w 2 dimension 330 +0 -4 100 2 13 +0.5 -0.2 20.2 +1.5 -0 2 0.5 24.4 +2 -0 30.4 max dimensions of the leader and trailer dimensional drawing of the reel
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 8 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 additional items (1) cover tape peeling strength the cover tape shall be adhered evenly to the carrier tape along both sides in the pulling direction. the cover tape peeling strength shall be as follows for an angle between the cover tape and the pulling direction of 165 to 180 (see the figure) and a peeling speed of 300mm/min. 10mm/min. [eia-481] 0.1n to 1.3n for a tape width of 12 to 56mm tape material (1) carrier tape [anti-charging treatment: carbon used] surface resistivity: 1 x 10 8 or less material: polystyrene or polycarbonate (2) cover tape material: polyester (anti-charging treated) surface resistivity: 1 x 10 12 or less t = 50 to 100m warranty periods cover tape peeling strength and mounting performance of stored components. 2-1. cover tape peeling strength: one year after delivery (peeling strength: 0.1n to 1.3n) number of missing components there shall not be two or more consecutive missing components. also, the maximum number of missing components shall be the larger of one piece or 0.1%. storage environment keep the product on which taping has been performed to a temperature below 40c and a humidity within 80% rh. do not subject in the direct sun. fixing method 1. insert the tip of the carrier tape into the groove. 2. fix the tip of the cover tape with adhesive tape.
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 9 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007
229.25 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 10 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF2062A-022007 7 inch reel quanity per reel number reels per carton external caton dimensions reel weight shipping carton weight total weight 500 4 254 x 254 x 127 mm 10 x 10 x 5 inches 896 g 448 g 1344 g 500 10 254 x 254 x 203 mm 10 x 10 x 8 inches 2240 g 448 g 2688 g 13 inch reel quanity per reel number reels per carton external caton dimensions reel weight shipping carton weight total weight 2000 2 356 x 356 x 102 mm 14 x 14 x 4 inches 1288 g 448 g 1736 g 2000 4 356 x 356 x 178 mm 14 x 14 x 7 inches 2576 g 448 g 3024 g 2000 8 356 x 356 x 356 mm 14 x 14 x 14 inches 5152 g 448 g 5600 g package for shipment
|
